CA610 Online Fluoride analyser with reagents

CA610 Online Fluoride analyser with reagents
Product #: 5740011
Unit Price Contact Us

Reliable, full-time Fluoride monitoring

Patented electrode design with replaceable tip

Cost effective operation - ultra-low reagent consumption

Automatic calibration

Specifications

Accuracy: ±10% or ±0.10 ppm, whichever is greater
Air purge: 0.1 cfm at 20 psig max.instrument quality air, 1/4-inch OD tubing,
quick-disconnect fitting,
Alarm: 2 SPDT relays (unpowered.), 5A resistive load at 240 Vac. Suitable for sample set point alarms (high or low)
or system warning indicator or system alarm indicator.
Calibration method: Two-point log/linear using 0.5 mg/L and 5.0 mg/L fluoride standards
Compliance certifications: CE approved, ETL listed to UL 1262,ETL certified to CSA 22.2 No. 142,
Cycle time: 4.2 minutes
Detection limit: 0.10 mg/L
Dimensions (H x W x D): 34.3 mm x 41.9 mm x 19.1 mm
Display: LCD, 3 to 1/2-digit measurement readout and six-character alphanumeric scrolling text line
Drain: 1/2-inch ID flexible hose
Flow rate: 200 to 500 mL/minute
(200 mL/min minimum required)
Inlet pressure: 1 to 10 psig (use sample restriction device
to reduce higher pressure samples)
Measuring range: 0.1 - 10 mg/L fluoride
Mounting: Wall mount
Operating humidity: 90 % at 40 °C max.
Operating temperature range: 5 - 40 °C
Power requirements (Amps): 2.5 A
Power requirements (Hz): 50/60 Hz
Power requirements (Voltage): 100 - 115/230 V AC
Power supply: selectable, 90 VA max.
Recorder outputs: One isolated recorder output, 4-20 mA (can be adjusted to 0-20 mA); max.
impedance 500 ohm, 130 V isolation
from earth ground.
  Output span is
programmable over any portion of the
measurement range.
Sample temperature: 5 - 40°C (41 - 104°F)
Storage conditions: -40 - 60 °C (without reagents)
Warranty: 24 months
Weight: 11,3 kg ( 25 lb.)