Product Number: LPV415.99.32001
The turbidity bypass sensor that brings clarity
The Hach Ultraturb sensor is Hach’s most versatile turbidimeter. With its wide measurement range (0-1,000 NTU) and optional automatic cleaning system, the Ultraturb is well suited for everything from filter effluent and distribution systems to raw water monitoring. The Ultraturb uses a ratio methodology with 90° and 180° in a pressurized sample chamber to achieve a high degree of accuracy over its wide measurement range.
The Hach Ultraturb Seawater sc sensor measures turbidity from 0.0001 to 1000 FNU (NTU) for a wide variety of low to medium range turbidity applications. Use it to effectively monitor conventional filtered water processes, effluent water, distribution systems, and elevated tanks where small-sized particulates or air entrapment may be an issue.
The Ultraturb Seawater sc sensor is available with an automatically self-cleaning sample chamber that guarantees stable measured values. The silicon wiper blades inside the sample chamber are held in place with a magnetic coupling wheel to further keep the sample chamber intact.
The Ultraturb Seawater sc sensor uses ratio methodology with detection at 90° and 180° to minimize reflections in the measuring cell and on the windows. In this way, fouling of the sample chamber is detected earlier than with a single detection system. The sensor meets the ISO 7027 turbidity requirements for online process turbidity.
The new Ultraturb Seawater sc is resistant to salt concentrations up to 65 g/L.
The Ultraturb Seawater sc sensor can be used with Hach’s Digital SC Controllers. The SC4500 controller accepts up to two sensors and the SC1000 accepts up to eight sensors. Multiple controllers can be networked to accommodate many more sensors and parameters, reducing the cost per measuring point. Just plug in any Hach “plug and play” digital sensor and it’s ready to use without software configuration. “Plug and play” connectivity means there’s no complicated wiring or set up. Network the Ultraturb Seawater sc sensor with any of Hach’s digital sensors for measuring dissolved oxygen, ORP, conductivity, and many other parameters.
