Product Number: BU3011.XX.XXXXX
Stationary sampler using pressure-vacuum technology. With robust PE housing, microprocessor controlled refrigeration system and easy to clean sample bottles.
Operates in time-, volume- (flowproportional), or event-based mode. Compared to peristaltic methods the pressure-vacuum technology ensures high volume accuracy (due to dosing vessel). There is no wearing out of the sample tube.
The temperature controlled, weatherproof housing made of PE plastic ensures failure free operation over many years. Even under conditions where stainless steel usually corrodes.
The tropicalised cooling system ensures a sample storage at 4°C up to an ambient temperature of 43°C.
Thus the sample is refrigerated to exclude biological and chemical changes. To avoid cross contamination, the system is rinsed before and after each sample is taken. The pressure-vacuum sampler is ISO 5667 compliant and therefore satisfies the requirements for subsequent reproducible analysis.
For use in sewage treatment, industrial facilities and for monitoring surface waters.
The sampler functions according to the pressure vacuum-principle and operates in time, volume (flow-proportional), or event-based mode. Compared to peristaltic methods the pressure vacuum technology ensures high volume accuracy (due to dosing vessel). There is no wearing out of the sample tube.
The temperature controlled, weatherproof housing made of PE plastic ensures failure free operation over many years. Even under conditions where stainless steel usually corrodes.
Depending on the configuration the sampler's weight is approx. 60kg. Therefore installation locations can be changed without difficulty.
The tropicalised cooling system ensures a sample storage at 4 °C up to an ambient temperature of 43 °C.
Thus the sample is refrigerated to exclude biological and chemical changes. To avoid cross contamination, the system is rinsed before and after each sample is taken.
No consumables are needed.
Maintanance free pressure vacuum technology plus maintanance free motor driven valve system & motor driven pinch valve. It is not necessary to change the pump tubing or other pneumatic parts periodically.
Cleaning of the multiple bottle sample container takes 50% less time compared to wedge shaped bottles.
All Bühler pressure-vacuum samplers are ISO 5667 compliant: They satisfy the requirements for subsequent reproducible analysis.