Product Number: LXV421.99.23011
Transparent, high quality Ammonium measurement technology for reliable values with short response time
High precision process-instrument for the determination of ammonium in water, wastewater and activated sludge. Indoor enclosure. 1-channel continuous. 115-230 VAC, 50/60 Hz power supply.
Can take one continous sample stream coming from a sample preparation, e.g. Filtrax.
The ammonium concentration in the sample is then determined by a gas sensitive electrode (removable membrane cap). Measuring range 1-100 mg/L NH₄-N.
Evaluation and operation with SC Controller. The analyser is equipped with an insulated enclosure for indoor installation.
Prognosys is a predictive diagnostic system that allows you to be proactive in your maintenance, by alerting you to upcoming instrument issues. Know with confidence whether changes in your measurements are due to changes in your instrument or your water.
There are additional options available. Please contact Hach for more details.
Visit Hach Support Online to explore our complete library of resources. 
Amtax sc Ammonium Analysers are available in four measuring ranges. With detection limits as low as 0.02 mg/L and ranges up to 1000 mg/L, the Amtax sc can be used anywhere in the wastewater treatment process, from the influent or start of the nitrification process with high NH4-N levels to the effluent with only low ammonium levels. In the lowest range it can also be used for drinking water applications.
Nutrient removal is a critical and sensitive process in wastewater treatment. Quick response is vital for optimal operation. The fast response time of only 5 minutes and selection of the measurement interval, make the Amtax sc one of the fastest responding ammonium analysers on the market.
The Amtax sc Analyser is designed to be installed at the measuring location, including outdoor locations. The housing is weatherproof and lockable so that the analyser can be installed right at the basin, even in the toughest climates.
The Amtax sc easily mounts to a wall, rail- and stand-mounting options are available. Due to its SC technology the anlyser is ready for use in the network of the SC controller ("plug-and-play").
The analyser calibrates and cleans itself automatically and is equipped with comprehensive self-diagnostic routines. With at least a 3-month supply of reagents (for 5 min interval), the Amtax sc analyser offers the most economical reagent consumption. Reagents and wear parts are easily accessible.
The Amtax sc analyser works with a low-maintenance filtration system (e.g. Filtrax) that removes particles larger than 0.15 µm. The filtrate is sent to the analyser while air bubbles constantly clean the filtration membrane.
The analyser is also available as two channel version for measurement at two different sampling points.
