Product Number: LXV433.99.00001
Smart amperometric Ozone Analyser: 9185 sc
Single-channel industrial analyser. Two-electrode sensor with a membrane selective to O3. pH and temperature compensated. All-inclusive system (without controller) preassembled on a panel.
The 9185 sc Ozone Sensor is an online, single-channel industrial sensor that measures ozone in drinking water treatment plants, distribution networks, and other applications that require monitoring of ozone at the ppb and ppm levels. This instrument uses an amperometric method to measure ozone concentration. A membrane allows the selective diffusion of ozone molecules to the amperometric sensor. The measurement is compensated for pH and temperature.
Bromine, chloramines, chlorine, chlorine dioxide, hydrogen peroxide, and pH do not interfere with ozone measurements using the Hach 9185 sc Amperometric Ozone Sensor, which can measure from 0 - 2 mg/L ozone.
The 9185 sc ozone system has a low minimum detection limit of 0.005 mg/L ozone. Because the amperometric cell is separated from the sample by the membrane and is immerged into an electrolytic medium, the 9185 sc ozone sensor is suitable for use in water with low conductivity.
The sensor used in the 9185 sc system is a two-electrode amperometric sensor (gold cathode and silver anode) with a membrane selective to ozone. Membranes are pre-mounted on retaining caps to simplify and reduce maintenance time.
The all-inclusive 9185 sc ozone system comes preassembled on a panel. The membrane system of the sensor means there are no chemicals used for measurement.
The 9185 sc Ozone Sensor is designed to be used with all Hach digital SC controllers. Set up is fast and easy, and the system is compatible with the full line of Hach digital sensors.